Polycom CX700 Router User Manual


 
Using the Basic Features of Your Polycom® CX700 IP Phone
3 - 9
Forwarding Calls
You can configure your phone so that all incoming calls are forwarded to
another party (known as static forwarding). You can also forward calls while
the phone is ringing (known as dynamic forwarding).
Static Forwarding
To enable call forwarding:
1. At the top of the graphic display, select the Forwarding icon to the right
of your name.
2. On the Forwarding screen, select Forward to contact or phone number.
3. If you are forwarding to another contact or phone number, select the
contact name that you want to forward your calls, then press the OK soft
key.
4. On the Forwarding screen, press the OK soft key.
To disable call forwarding:
1. At the top of the graphic display, select the Forwarding icon to the right
of your name.
2. On the Forwarding screen, select Do not forward incoming calls.
3. Press the OK soft key.
Dynamic Forwarding
To forward an incoming call:
1. With the phone ringing, do one of the following steps:
a Press the Redirect soft key.
Enter a number to forward the incoming call to.
b Select To Voice Mail.
Note
You may also forward calls to your voice mail. This feature requires that you have
access to Microsoft Exchange 2007.