Filter
Top Products
7
Introduction
This manual is provided by Powermatic covering the safe operation and maintenance procedures for a
Powermatic Model PM1800 Band Saw. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or Powermatic. Powermatic can also be reached at our web site: www.powermatic.com.
Specifications
Model Number .............................................................................................................................. PM1800
Stock Number (5HP 1PH) .............................................................................................................1791800
Stock Number (5HP 3PH) .............................................................................................................1791801
Motor (1PH) ........................................................................................ TEFC, 5HP, 1PH, 230V, 60Hz, 21A
Motor (3PH) ................................................ TEFC, 5HP, 3PH, 230/460V (pre-wired 230V)*, 60Hz, 13/6.5A
Blade Speeds (SFPM) ........................................................................................................ 1800 and 4200
Maximum Cutting Height/Resaw Capacity (in.)....................................................................................... 18
Throat Capacity (in.) .............................................................................................................................. 18
Minimum Blade Width (in.) .................................................................................................................. 1/16
Maximum Blade Width (in.) ................................................................................................................ 1-1/2
Blade Length (in.) ................................................................................................................ 160 to 161-1/2
Blade provided (in.) ............................................................................. Hook Type, 3/4 W x 0.03 Thk, 4TPI
Resaw Fence (L x H)(in.) ............................................................................................................ 30 x 6-1/2
Resaw Pin (Dia. x H)(in.) ..............................................................................................................2 x 6-1/2
Table Dimensions (L x W x Thk)(in.) ......................................................................................... 24 x 24 x 2
Table Thickness (in.) ............................................................................................................................... 2
Table Tilt (deg.) .................................................................................................................. 45 right, 15 left
Table Height from Floor @ 90 deg. (in.) ........................................................................................... 37-1/2
Miter Gauge Positive Stops (deg.) .............................................................................................. 45 and 90
Wheel Diameter (in.) ........................................................................................................................ 18-1/2
Power Transfer ................................................................................................................. poly-V belt drive
Switch ................................................................................................ magnetic, with power indicator lamp
Dust Port Diameter (in.) ........................................................................................................................... 4
Dust Collection CFM Required ............................................................................................................. 400
Overall Dimensions (L x W x H)(in.) .................................................................................. 38 x 42 x 81-1/2
Net Weight (lbs.) .................................................................................................................................. 806
Shipping Weight (lbs.).......................................................................................................................... 902
*NOTE: For 460V operation, magnetic switch (part no. PM2000-293C) must be purchased separately and
installed. A qualified electrician is recommended.
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Powermatic reserves the right to change specifications at any time and without
prior notice, without incurring obligations.