Filter
Top Products
12
<Caution>
z If the equipment is not leveled, you cannot obtain accurate oil level.
z Do not overfill (over H line) the engine oil. The excessive volume of engine oil may damage
the engine (inside the cylinders)
Selecting proper engine oil
Use the engine oil for Diesel engine in proper viscosity, in
compliance with the ambient temperature.
<Caution>
z Use the API class CD grade or higher.
Viscosity and Temperature
Temperature
Over +20 +10 - +20 -10 - +40
Viscosity SAE30 SAE20 SAE10W/30
6-2 Checking Coolant/Water
Danger : Injuries
z Close all doors and place locks during operating this equipment, to avoid injuries by uninten-
tionally touching cooling fan and fan belt.
Danger : Burns
z Do not open the radiator cap while operating this equipment or immediately after stopping the
equipment, to avoid sustaining burns from hot vapor.
Caution : Burns
z Do not touch the engine and muffler during operation and immediately after stopping the
equipment, for the temperature can reach extremely high.
Check to see if the coolant/water level is between FULL and LOW levels in the reservoir tank. If
the coolant/water is below the LOW level, fill the tank and the radiator accordingly.
6-2.1 Filling to the Reservoir Tank
Take out the reservoir tank to remove the cap.
Fill up the reservoir tank to the FULL level.
Install the cap back and tighten, and reinstall the tank to
the equipment.
6-2.2 Filling to the Radiator
Remove the top plate.
Remove the radiator cap.
UPPER LIMIT (H)
LOWER LIMIT (L)
REQUIRE LEVEL
SIDE DOOR
CAP
RESERVOIR TANK