Filter
Top Products
19
welding output selector switch ( ECO , Single and Dual
Welding Current Adjustable Range
Selector Position Current Adjustable Range Welding Rod
ECO 30-160A
2.0-4.0
Single
Single Use 85-310A
2.6-6.0
Dual Dual Use 45-160A
2.0-4.0
After the engine is started (Refer to No. 7.1 Initializing/Preparation), operate as per the proce-
dures in the following table.
Welding Operation Procedure
ECO (Single) Single Welding Dual Welding
Procedure Operation
Welding Rod
2.0- 4.0
Welding Rod
2.6- 6.0
Welding Rod
2.0- 4.0
Selector
ECO SINGLE DUAL
Current
Adjustment
Current Adjust.
Dial A
Current Adjust.
Dial A
Current Adjust.
Dial A + B
8-5.2 DGW311L
Start the engine. (Refer to No. 7.1 Initializing/Preparation)
Adjust the current by the current adjustment dial.
Welding Current Adjustable Range
Current Adjustable Range
50Hz 60Hz
-(W)380A,-(W)400A,-(W)415A -(W)220B
Welding Rod
35-280A
45-310A
2.0- 6.0
9. Generator Operation
9-1 Output Range
9-1.1 DGW311DM-(W)220B, DGW311L-(W)220B
9-1.1.1 3-Phase 220V Output – Terminals
Maximum output from the terminals (U, V, W) is 10kVA.
CURRENT ADJUSTMENT
DIAL A
CURRENT ADJUSTMENT
DIAL B
OUTPUT SELECTOR
SWITCH
WELDING OUTPUT
TERMINAL A
WELDING OUTPUT
TERMINAL B
CURRENT ADJUSTMENT DIAL
BREAKER CURRENT ADJUSTMENT