Filter
Top Products
2
1. Safety Guidelines
Danger : Suffocation from exhaust fume
z Exhaust fume from the engine contains many elements harmful to human. Do not operate this
equipment in poorly ventilated area, such as inside a room or in a tunnel.
Danger : Electric Shock
z Do not touch the output terminals during operation.
z Do not insert metal objects (such as pin or wire) into plug-in receptacles.
z Do not touch wiring or electric parts inside the equipment during operation.
z Before connecting or disconnecting a load cable from output terminals, always turn the circuit
breaker to OFF position.
z Before connecting or disconnecting a welding cable from output terminals, stop the engine, and
remove the engine key.
z Before performing any equipment check or maintenance, stop the engine, and remove the engine
key. A person performing the check or maintenance should always keep the key.
Danger : Burns
z Do not open the radiator cap while operating this equipment or immediately after stopping the
equipment, to avoid sustaining burns from hot vapor.
Danger : Injuries
z Close all doors and place locks during operating this equipment, to avoid injuries by unintentionally
touching cooling fan and fan belt.
Caution : Suffocation from exhaust fume
z Do not point the exhaust fume toward pedestrians or building.
Caution : Suffocation from welding fume
z Be sure to wear a fume proof mask in operation, because welding fume contains poisonous gas
and dust. Pay attention to the airflow direction and sufficient ventilation also in order to prevent
from inhaling the fume.
Caution : Injuries to eyes and skin
z Be sure to wear spark protection glass(es), long-sleeve shirts, gloves, etc. in order to protect eyes
and skin from harmful spark in welding.
z Battery fluid contains diluted sulfuric acid. Avoid contact with eyes, skin or on clothing. If the acid
comes in contact, especially with eyes, flush with a lot of water, and contact to your physician
immediately.