Filter
Top Products
29
No AC output
1. Circuit breaker is to OFF
2. Output selector switch is to ECO
1. Turn to ON
2. Turn to SINGLE or DUAL
AC Output is Weak
1. The power consumption of the load
exceeds the rated output
2. Dual Use
1. Adjust according to OUTPUT
LIMITATION
2. Stop welding
Slow-Down does not activate
1. Short circuit of welding cable
2. The power consumption of the load
is 0.5A or below
1. Repair the short circuit
2. Turn the Slow-Down switch to
OFF
Engine does not stop 1. Stop Solenoid disorder
1.Turn the fuel lever to CLOSE
to stop and repair
Black and white smoke exhaust
from muffler successively
1. Overloaded use
1. Keep the duty cycle
2. Adjust according to OUTPUT
LIMITATION