Shindaiwa 4 Cycle Diesel Engine Welder User Manual


 
15
Danger : Suffocation from exhaust fume
z Exhaust fume from the engine contains many elements harmful to human. Do not operate
this equipment in poorly ventilated area, such as inside a room or in a tunnel.
Caution : Suffocation from exhaust fume
z Do not point the exhaust fume toward pedestrians or building.
Caution : Fire
z Temperature around muffler and exhaust can get extremely high. Keep any inflammable
items (such as fuel, gas, paint, etc.) away from the equipment.
z Always operate this equipment on flat surface and, at least 1 meter away from any objects
(wall, box, etc.)
Caution : Injuries
z Always place the equipment on flat and stable surface, to keep the equipment from sliding.
Be sure to lock the wheels for the wheeled models.
z When starting the engine, turn off the connected equipment and set the circuit breaker to
OFF position.
Turn the circuit breaker to OFF position.
Turn the fuel lever to OPEN.
Turn the Slow-Down switch to ON.
When the temperature is below 5 turn the starter
switch to PREHEAT. The preheating lamp flashes 15
seconds. The lamp comes off when the PREHEAT fin-
ishes.
Turn the starter switch to START to start the engine by the
starter motor.
<Caution>
z Do not drive the starter motor for more than 15 seconds successively.
z If you need to restart, wait for 30 seconds or more before retry.
Release the starter switch, as soon as the engine is started.
<Caution>
z Once the engine is started, do not turn the starter switch to START.
Make sure the frequency to the monitor on the control panel.
Keep the engine idle for about 5 minutes.
FUEL LEVER
CLOSE
OPEN
SLOW-DOWN SWITCH
STARTER SWITCH
PREHEAT LAMP
CIRCUIT BREAKER
DGW311DM
PREHEAT LAMP
STARTER SWITCH
SLOW-DOWN SWITCH
CIRCUIT BREAKER
DGW311L