Filter
Top Products
3
Caution : Electric shock
z Do not flush water onto the equipment nor operate it in the rain.
Caution : Explosion
z When the liquid level is below the LOWER level, never use the equipment nor recharge the battery.
z Battery may emit some combustible gas, so keep it away from fire and sparks.
Caution : Fire
z The equipment uses Diesel fuel as a fuel. When refueling, always stop the engine and keep away
from fire. Moreover, always wait until the engine cools down before refueling.
z Always wipe any drip of Diesel fuel or lubrication oil. Do not use this equipment when a leak is
found. Repair the equipment before use.
z Temperature around muffler and exhaust can get extremely high. Keep any inflammable items
(such as fuel, gas, paint, etc.) away from the equipment.
z Keep any inflammable items and easily burning items away from the place in welding, because
welding splashes spatters.
z Always operate this equipment on flat surface and, at least 1 meter away from any objects (wall,
box, etc.).
z Do not connect AC output to any indoor wiring.
z Always wait until the equipment cools down, before placing any covering materials for storage.
Caution : Burns
z Do not touch the engine and muffler during operation and immediately after stopping the equip-
ment, for the temperature can reach extremely high.
z When checking engine oil or changing oil, always stop the engine, and wait until the engine cools
down. If you open either the oil gauge or the oil filter cap during operation, hot oil may cause some
injury.
z Be sure to wear leather gloves, apron, shoe covers, eye protection glass(es) (mask), safety shoes,
safety cap, and long sleeve shirts, because welding splashes spatters.
Caution : Injuries
z When lifting the equipment, always use a lift hook. Do not lift a handle, for it may cause equipment
to drop due to handle breaking off.
z Always place the equipment on a flat and stable surface, to keep the equipment from sliding. Be
sure to lock the wheels for the wheeled models.
z When starting the engine, turn off the connected equipment and set the circuit breaker to OFF po-
sition.
z Do not move the equipment during operation.
z When performing equipment check and maintenance, always stop the engine.
z Do not operate the equipment, if the equipment is being modified or if the parts are removed.