Shindaiwa 4 Cycle Diesel Engine Welder User Manual


 
21
9-1.2.3 1-Phase Output – Terminals
1-Phase Output is available, using the 3-Phase output terminals and the other terminal (O).
Maximum output available for the one set of terminals is 3kVA but the total output for 3 sets is
8kVA, which please note.
<Caution>
z When using 1-Phase output, connect the loads evenly to each terminal set as much as pos-
sible.
9-2 Output Limitation
Please refer to the following table, because electric tools and home appliances cannot be judged
only by the rated output or the power consumption due to the efficiency and characteristic of the
components.
DGW311DM-(W)220B, DGW311L-(W)220B :
Applicable Load (For reference purpose only) (60Hz)
Capacity (kW)
1-Phase 110V
1-Phase 220V
3-Phase
220V
Loads
Receptacle
1 unit
Terminal
1 set
Receptacle
& Terminal
Tota l
Terminal
1 set
Terminal
3 sets
Total
Terminal
Electric Bulb, Heater, etc. 1.5 3.0 6.0 6.0 8.0 -
Electric Tools (Series Motor),
etc.
0.7 1.5 3.0 3.0 4.0 -
Mercury Bulb (High Power
Factor Type)
0.6 1.2 2.4 2.4 3.2 -
Submersible Pump, Com-
pressor, etc. (Induction Mo-
tor)
0.6 1.2 2.4 2.4 3.2 4.0
DGW311L
-(W)380A -(W)400A -(W)415A
Output
voltage
220V
230V
240V