Shindaiwa 4 Cycle Diesel Engine Welder User Manual


 
25
Use the hour meter as a guide for the operating time.
Checking Time
Checking Items Startup
Check
At
50hrs
Every
200hrs
Every
400hrs
Every
1000 hrs
Every
2000 hrs
1 Check and Supply Fuel
2 Check and Supply Engine Oil
3 Engine Oil Change
1
st
2
nd
or
after
4 Oil Filter Change
1
st
2
nd
or
after
5 Check/Add Water/Coolant
6 Water/Coolant Change
or
one year
7 Clean/Change Fuel Filter
(Clean)
(change)
8 Drain Water from Fuel Tank
9
Check Leakage Fuel Oil Water
10 Check/Add Water Battery
11 Clean/Change Air Cleaner Element
(Clean)
(change)
12 Adjust Tension V-Belt
1
st
2
nd
or
after
13 Clean Radiator Fin
14
Change Hose Fuel Radiator
Change Vibration-Absorbing Rubber
or 2
years
15 Adjust Engine Valve Clearance
(Adjust) (Adjust)
16 Check/Adjust Injection Nozzle
17 Check/Adjust Injection Pump
11.1 Oil Change
Remove the oil plug.
Loosen the oil drain plug and allow the oil to drain fully.
Reinstall the oil drain plug.
Checking the oil level by the oil level gauge, add oil
into the oil filler to fill up to the max level. (3.5 liter Max)
Reinstall the oil plug hand tight.
<Caution>
z Refer to 6-1 Checking Engine Oil to select engine oil.
11.2 Oil Filter Change
Drain the engine oil fully, as describe in 11-1 Oil Change
First Time 50 hour mark
2
nd
or after Every 200 hours
First Time 50 hour mark
2
nd
or after Every 200 hours
OIL DRAIN PLUG
OIL PLUG (YELLOW)
OIL
FILLER
SIDE
DOOR