Shindaiwa DGW310DMC Welder User Manual


 
11
Danger: Injuries
Close all the doors and place lock during operation, to avoid injuries by unintentional touch of cooling
fan or fan belt.
Danger: Burns
Do not open the radiator cap while operating this equipment or immediately after
Caution: Burns
Do not touch the engine and muffler during operation and immediately after stopping it, for
Danger: Injuries
Close all the doors and place lock during operation, to avoid injuries by unintentional touch
of cooling fan or fan belt.
(1) Water Temperature Monitor Lamp
When the water temperature rises abnormally, the water temperature lamp flashes and the automatic
shutdown will be engaged.
When this happens, check water tank and replenish if needed. Refer to 6-2. Check the water
temperature
If the water level is normal, there may be possibility of overload. Always use the equipment within the
rated duty cycle and output power.
(2) Battery Charge Monitor Lamp
When the battery charge becomes unable during operation, the monitor lamp flashes and the automatic
shutdown is engaged.
Please consult with our authorized distributor or service section.
Caution
The monitor cannot detect battery degradation or insufficient battery liquid.
Be sure to check battery liquid level periodically.
(Refer to 6-5. Battery Check )
(3) Oil Pressure Monitor Lamp