Filter
Top Products
34
2) Change Oil Filter
1st At 50 hrs
2
nd
or after Every 200 hrs
1 Drain the oil as described in
(1)Change Engine Oil .
2 Remove the oil filter using an oil filter wrench.
3 Smear a little engine oil on the rubber gasket of a new filter.
4 Screw the new filter into place and tighten it by
Hand until the gasket contact seat. Then give it
additional 1.1/4 turns using an oil filter wrench.
5 Supply engine oil.
Caution
●If an oil filter wrench is not available to get, contact our authorized
distributor or our service section to change.
●Oil Filter Part No.:15853-32433 (Kubota)
●After supplying engine oil, keep the engine drive for
a while to check no engine oil leakage and then stop the engine
(3) Clean/Change Air Element
Clean 1
st
at 50 hrs 2
nd
or after 100 hrs
Change Every 400 hrs
1 Loosen the wing bolts in the cleaner and
remove the air element.
2 Clean or replace the air element.
Dried contaminants adhere
Blow up compressed air from inside
the element.
Carbon or oil adhere
Replace to a new one.
3 Reinstall it in reverse order.
Air Cleaner
Clip
Gasket
Oil filter
Air element
Clip
Air Cleaner
cap