Woodstock W1813 Sander User Manual


  Open as PDF
of 56
 
-19-
N(/(*(/Fg\e<e[N`[\9\ckJXe[\i
FG<I8K@FEJ
9Xj`Z:fekifcj
Refer to =`^li\(- and the following descriptions to become familiar with the basic controls of your
sander.
A
B
H
I
=`^li\(-% Basic controls.
8% 8dg\iX^\CfX[:_Xik1Displays the amper-
age range for safe operation of the sanding
motor. NEVER operate the sander above the
SAFE range!
9% 8dg\iX^\CfX[D\k\i1Shows the amper-
age used by the sanding motor during oper-
ation.
:% Gfn\iC`^_k1Lights when power is con-
nected to the machine.
;% JXe[`e^DfkfiFE9lkkfe1Starts the sand-
ing motor when pressed.
<% <d\i^\eZpJkfg9lkkfe1Turns the sanding
and conveyor motors F==. This button does
NOT disconnect the machine from power.
=% :fem\pfi=\\[IXk\;`Xc1Controls the
feed rate of the conveyor between 5 and
17 feet per minute (FPM).
>% :fem\pfiFE&F==Jn`kZ_n&;`jXYc`e^B\p1
Starts or stops the conveyor motor. Remove
the key to disable the switch.
?% <c\mXk`feCfZb1Locks the sander assembly
in place above the conveyor after reposi-
tioning it with the elevation handwheel.
@% <c\mXk`feJZXc\Gf`ek\i1Displays the
height of the sanding drum above the con-
veyor.
A% <c\mXk`fe?Xe[n_\\c1Raises and lowers
the sander assembly above the conveyor.
C
D
E
F
G
J
 previous next