Sierra Wireless 2400154 Saw User Manual


 
Get Started
Rev 2 Mar.12 14
2. Replace the back cover.
Note: The battery comes partially-charged and ready to go. You do not need to charge it
fully unless you wish to. When the battery needs recharge, follow the instructions in
Recharge the Battery on page 33.
Connect to the Internet
Note: Your mobile hotspot does not need to be connected to the computer with the USB
cable to connect to the Internet. The USB cable is used mainly for recharging the battery.
(If you want to connect to the Internet with the mobile hotspot tethered to the laptop using
the USB cable, see Tethered mode on page 14 before connecting for the first time.)
To connect to the Internet:
1. Turn on the mobile hotspot.
Press and hold the power button for a few seconds.
The first time you connect a computer to the mobile hotspot network, the LCD
screen displays the message “Connect your computer to Wi-Fi network”. The
Wi-Fi SSID (Network Name) and the Wi-Fi Key are shown on the LCD screen.
Note: The LCD screen may go into sleep mode to save power. To wake up the LCD
screen, press and quickly release the power button.
2. Connect your computer or other device to your Wi-Fi network.
a. On your computer, view the list of available Wi-Fi networks.
b. Select the Wi-Fi SSID (Network Name) displayed on the mobile hotspot
LCD screen, and connect to it.
c. When prompted, enter your Wi-Fi Key as it appears on the mobile hotspot
LCD screen.
3. Launch your browser to surf the Internet.
Optional: To personalize your mobile hotspot go to http://att.elevate.
Note: To make changes to the mobile hotspot settings on the homepage, you must first log
in as Administrator. Type attadmin in the Admin Login box.
Tethered mode
*
The first time you use your mobile hotspot in tethered mode (connected to a
computer using the USB cable):
1. Ensure that the mobile hotspot is powered off.
2. Use the USB cable to connect the mobile hotspot to your computer.
*. * Enterprise variant available with microSD and WPS functionality disabled and driv-
ers supporting tethering removed.