Filter
Top Products
INTRODUCTION
-2-
For Machines Mfg. Since 8/09
Model SB1019
INTRODUCTION
About This Machine
Capabilities
This metal cutting bandsaw uses a hydraulically-
stabilized gravity-fed headstock to make straight
cuts through workpieces that are clamped in a
vise. Since the workpiece is secured and remains
stationary while the blade lowers automatically,
accuracy and operator safety are maximized,
since the operator can stand safely away from
the machine as it is cutting.
The vise on the Model SB1019 is capable of
holding rectangular stock up to 7" x 8" and round
stock up to 7".
After a cut is complete, the OFF switch is
triggered and the motor automatically turns off.
Features
In addition to its capabilities, the Model SB1019
has several features to increase versatility and
efficiency.
The headstock swivels and can be rotated to
make angled cuts from 45° to the left through 45°
to the right while three blade speeds ensure that
the proper cutting rate is available for a variety
of blade pitches, workpiece sizes and material
types.
Both the downfeed rate and pressure are
adjustable for fine-tuning each cutting operation
and an adjustable auto-OFF power switch
maximizes safety and minimizes energy use by
turning the machine off at the end of every cut.
A flood coolant system, comprised of a coolant
tank and pump in the machine base and an
adjustable nozzle at the blade provide adequate
coolant for optimum cutting efficiency and blade
life.
A storage compartment in the cabinet base
provides a convenient location for keeping spare
blades or other accessories and the transport
handle makes moving the machine easy.