Strong Enterprises 48057 Work Light User Manual


 
PARTS LIST
Figure 1
Item Part No. Description
1 65114 Reflector Bulkhead Casting
2 00805 Tie Rod Lock Nut, 1/4-20 Hex
3 65164 Tie Rod, Bulkhead to Front Casting
4 65111 Lamphouse Front Casting
5 65865 Lamphouse Base Pan & Lower Side
6 65155 Inner Heat Shield, Left
- 65156 Inner Heat Shield, Right (not shown)
7 65117 Front Bulb Support Yoke
- 65151 Retainer Plate
- 65152A Thumb Screw, Retainer Plate (2 req’d.)
- 01567 Mounting Screw, 10-24 x 1/2" Bind Head
8 65115 Air Duct Casting
9 00262 Screw, 8-32 x 1" Fillister Head
- 65171 Insulator Bushing
10 65175 Insulator Plate
11 41-51122 Screw, 1/4-20 x 3/4" Hex Head
- 00876 Lockwasher, 1/4" Split Ring
- 00805 Hexnut, 1/4-20
12 01432 Screw, 1/4-20 x 1/2" Socket Head
13 65503 DC Pulse Igniter Assembly
14 80168 Side Cover Interlock Switch (S5)
- 72178 Switch Mounting Bracket
15 65112 Lamphouse Back Casting
16 61-98002 Blower (B1), 115 V.AC, 50/60 Hz.
17 65966 Igniter Lead & Clamp Assembly
18 65827 Bulb Positioning Assembly (less Collet)
19 65960 Rear Support Collet
- 21-48027 Collet Retaining Ring
20 65131 Contact Clamp (incl. with Item 17)
21 65134 Barrier Strip, (10) Terminal
- 00182 Screw, 6-32 x 7/16" Fillister Head
- 65160 Barrier Strip Mounting Bracket
- 00255 Screw, 8-32 x 5/16" Fillister Head
22 80168 Top Cover Interlock Switch (S1)
- 65185 Switch Mounting Bracket
- 00254 Screw, 8-32 x 1/4" Fillister Head
23 23756 Flanged Reflector, 10" Dichroic
NOT SHOWN
65895 Lamphouse Top Cover Assembly
65866 Cap, Exhaust Stack
01736-1 Tamperproof Screw, 10-32 x 1/2" Holt Head
65149A Screwdriver (for 1736-1)