Filter
Top Products
VBrick WM Appliance Admin Guide 113
Chapter 5
Diagnostics
Topics in this chapter
Diagnostics: Network Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Diagnostics: Device Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Diagnostics: Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Diagnostics: Network Tests
Diagnostics: Network Tests > Ping Test
This menu allows the user to initiate a data test from one VBrick to another. To Ping another
VBrick, it's necessary to enter Edit mode. Enter the IP address and Test Settings and select
the
Start button. The Operational State will read Ping Test. After the test is completed, use
the Refresh button to display the results of the test. The results of the test will be displayed
in the top portion of the screen. If the test is interrupted by pressing the Stop button, the
results of the test prior to termination will be displayed.