Filter
Top Products
WM Configuration
VBrick WM Appliance Admin Guide 69
Table 13. Supported Clients with JPEG Capture
Configuration: FTP File Transfer
Configuration: FTP File Transfer > Servers
Up to eight servers are available and can be simultaneously selected. When more than one
server is enabled, the appliance will transfer the newly recorded file to each enabled server.
Since FTP transfer can be a slower than the recording process, it is possible to overrun the
FTP queue if too many servers are enabled. Failure conditions during FTPs are noted on
Status: Hard Drive > Archiver
page.
Model JPEG Configuration Max Clients †
Dual WM/WM encoder
(with archiver)
JPEG disabled on both slots. 180
JPEG enabled on one slot. 140
JPEG with deinterlace enabled on one slot. 100
JPEG enabled on both slots. 100
JPEG enabled on both slots; JPEG deinterlace
enabled on one slot.
60
JPEG with deinterlace enabled on both slots. 20
Dual WM/MPEG-2
encoder (with archiver)
JPEG disabled on slot1. 200
JPEG enabled on slot1. 200
JPEG with deinterlace enabled on slot1. 170
† The actual number of supported clients will generally vary slightly depending on your
hardware configuration, network constraints, and other variables.