Filter
Top Products
70 © 2008 VBrick Systems, Inc.
FTP Server 1–8
Name FtpServer1–FtpServer8.
Type VBrick or Non-VBrick Appliance.
• VBrick Appliance – When sending to a VBrick appliance, the
serving VBrick must select the D: directory. The configuration of
VBrick Appliance automatically adds D: to the path name or to any
other configured folder or as part of the Directory entry. If no
folder is specified, all files will be transferred to the D: directory.
Additionally, subfolders may be specified.
• Non-VBrick Appliance – A non-VBrick appliance setting allows a
destination server to select its own path name, based on account
user name and password. In this case, the Directory setting may be
used to specify any sub-folder on the server.
DNS Name/IP DNS server name or IP address for the FTP server. It accepts up to 20
characters. The Host Name/IP must be a DNS Host Name.
User Name FTP server user's account name.
Password Optional. Password required to access the FTP server. Accepts up to
20 characters. The FTP User Name and Password must be set up
properly on the remote FTP server. If they are not entered the same as
what is set up on the server, the VBrick will be unable to connect and
perform the transfer.
Account Optional. Account name required to access the FTP server.