Installing In-Sight™ 4000 Series Vision Sensors Section 2 – Installing the In-Sight 4000
13
2.2 Installing In-Sight PC Host Software
The In-Sight 4000 is configured, and its operation monitored, over an Ethernet network
from an In-Sight 3000 or from a PC. An In-Sight 4000 accessed from a networked
In-Sight 3000 is configured using a control pad.
An In-Sight 4000 accessed from a networked PC is configured using mouse and
keyboard input. The following must be installed on the PC:
#
A Microsoft® Windows™ XP, 2000, NT 4.0 (with Service Pack 4 or later), Me,
or 98SE operating system.
#
A network card that supports 10/100 Base-T Ethernet TCP/IP communications.
#
In-Sight PC Host software version 2.30 or later (included on the CD-ROM
shipped with your system).
#
Internet Explorer 4.0 or higher to display the In-Sight Guide & Reference.
NOTE In-Sight PC Host software can be used only on a local subnet that includes a networked In-Sight
sensor.
To install In-Sight PC Host software on a Windows PC:
1 Shut down any applications running on your PC.
2 Insert the In-Sight installation CD-ROM into your PC’s CD-ROM drive. If the install
program starts automatically, follow the setup dialogs as they appear on screen. If
the install program does not start automatically:
3 Click the Start menu, click Run, and then click Browse.
