A SERVICE OF

logo

Open as PDF
next previous
Section 2 – Installing the In-Sight 4000 Installing In-Sight™ 4000 Series Vision Sensors
16
To install the In-Sight 4000 on a non-DHCP network:
1 Logon to an In-Sight 3000 or In-Sight PC Host program on the local network.
2 From the In-Sight spreadsheet, open the System menu (Figure 2-4).
Figure 2-4: System Menu
3 Select Logon to open the Logon dialog (Figure 2-5).
Figure 2-5: Logon Dialog
4 Select the Host Name drop-down list to see the names of any In-Sight systems
already installed on the network.