Section 2 – Installing the In-Sight 4000 Installing In-Sight™ 4000 Series Vision Sensors
20
2.5 Changing In-Sight 4000 Network Settings
You may need to change the In-Sight 4000 sensor’s Network settings when installing it
to a non-DHCP network where a Default Gateway, DNS Server, and Domain name are
used, or when moving the In-Sight 4000 from one network to another.
To modify In-Sight 4000 network settings:
1 Logon to an In-Sight PC Host or In-Sight 3000 on the network.
2 Select Logon to open the Logon dialog.
3 Select the Host Name field to open a drop-down list showing the In-Sight systems
on the network.
4 Select the In-Sight 4000 sensor’s Host Name and click OK. The In-Sight 4000
spreadsheet will appear.
5 Open the In-Sight System menu and select Settings.
6 Select Network to open the Network dialog (Figure 2-9).
Figure 2-9: Network Dialog
Each of the Network dialog settings is explained in the following sections. For more
information, refer to the In-Sight Guide & Reference HTML Help file.
