Taking Pictures
2-7
2
After you take a picture, the green indicator light
blinks. This signals that the image has been captured
and the camera is processing it. When the light stops
blinking, the image is saved. Saved images remain in
the memory card even when the camera is turned off,
the batteries are removed, or the memory card is
removed from the camera.
When the indicator light next to the viewfinder stops
blinking, the camera is ready to take another picture.
Using the optical zoom feature
You can capture a smaller portion of the subject at a higher
magnification using the optical (x3) zoom feature.
Your PhotoPC 3000Z’s optical zoom feature allows you to
increase the magnification of your images by as much as
three times. To use the optical zoom feature, press the W
and T buttons on the back of the camera under the dial
switch. To zoom out, press the W button. To zoom in, press
the T button. You can use the optical zoom feature at any
time when taking photos.
When using the zoom feature in the or dial position,
the following zoom indicator appears at the top of the LCD
monitor.
zoom in
(telephoto)
zoom out
(wide)
