5-4
Using Print Mark to Print Photos
16. Press the Save button to save your settings. The main
menu of the Print Mark program appears.
If you want to change the current settings, press the
BACK button to return to the previous screen. To
change which photos are selected or the number of
prints, return to step 5. To change the index print
settings, return to step 11.
17. Press the button below Exit to return to the program
selection menu.
Printing an index of photos
Using the DPOF file, you can instruct the printer to print an
index of the photos on your memory card. Follow these steps
to make a new DPOF file.
1. Set the dial switch to and turn on the camera.
2. Press the PrintMark button. The Print Mark main menu
is displayed.
3. Press the New settings button.
Note:
If a previous DPOF file exists, a message appears to
confirm that you want to delete it. Press
Done
to
continue or
Cancel
to quit.
4. Press the Index button to select a several-per-sheet
layout.
5. Press the Index print button to select All or Selected.
Refer to the chart below for details.
Note:
Print Mark can handle a maximum of 1,000 photos on
each memory card. Even if you select
All
, the program
cannot access the photos in excess of the limit.
6. If you chose Selected, press the Select Image button to
specify the photos that you wish to include in your
index print.
Setting Result
All Index sheets containing all of the photos saved
on the memory card will be printed. Skip to
step 12.
Selected Index sheets containing the selected photos
will be printed. Proceed to the next step.
