3-4
Viewing and Managing Your Images
Note:
A number is displayed on each photo that is currently
included in the slide show.
4. To exclude a photo from the slide show, press the arrow
icon buttons to select the photo with the white frame,
then press Exclude. To exclude all of the photos, press
Exclude All.
To include an excluded photo in the slide show, press
the arrow icon buttons to select the photo with the white
frame, then press Select. To include all of the photos,
press Select All.
5. Press the BACK button when you are finished selecting
photos, then follow steps 3 through 6 in “Viewing a
slide show of your photos” on page 3-2.
Rotating photos
You can rotate any photo by 90 degrees to the right or left
for display in a slide show. To rotate a photo, follow these
steps.
1. Set the dial switch to , then turn on the camera.
2. Press the Menu Change button, then press the SLIDE
SHOW button.
3. Press the Settings button.
To make selecting photos easier, you can display either
four or nine photos at a time by pressing the button
below Multi once or twice. A white frame appears
around the selected photo.
4. Press the arrow icon buttons to select the photo that you
want to rotate.
5. To rotate the photo 90 degrees to the left from its
original orientation, press the Rotate button once. Press
it again to rotate the photo 90 degrees to the right from
its original orientation. Press the button again to return
the photo to its original orientation.
To rotate other photos, repeat steps 4 and 5.
6. Press BACK when you are finished rotating photos,
then follow steps 3 through 6 in “Viewing a slide show
of your photos” on page 3-2.
