5-6
Using Print Mark to Print Photos
4. Press either the Change or the Confirm frame button.
Refer to the table below for details.
Note:
You can enlarge the preview of the selected photo by
pressing the
magnification icon button. Press the
BACK
button to return to the normal selection screen.
5. Press the BACK button to return to the main menu of
the Print Mark program.
6. Press the Exit button to return to the program selection
menu.
Deleting the DPOF File
To delete your DPOF file, follow the steps below.
1. Set the dial switch to and turn on the camera.
2. Press the PrintMark button. The Print Mark main menu
is displayed.
3. Press the Delete button. A confirmation message
appears.
4. Press the Done button to delete the DPOF file. To return
to the main menu, press the Cancel button.
5. To quit the Print Mark program, press the Exit button.
Note:
Pressing
New settings
allows you to make a new DPOF
file. See “Making the DPOF File” on page 5-2 for
details.
Button Result
Change Allows you to change and save the settings
using the same procedures that you use to
make new settings.
Confirm frame Allows you to confirm and change which
photos are selected and the number of copies
of each selected photos that will be printed.
Press the left and right arrow icon buttons to
select a photo. The number of copies of the
photo that will be printed is displayed.
