Making Settings
4-19
4
Selecting the internal or external flash
The PhotoPC 3000Z has a convenient built-in flash which
satisfies ordinary flash needs. If you need more light, you
can attach an external flash (sold separately as a camera
accessory) to the PhotoPC 3000Z.
To mount the external flash, turn off the flash and your
camera, slide the mounting foot of the flash into the hot-
shoe attachment on the top of the PhotoPC 3000Z, and
secure the lock mechanism. For details about using the flash,
refer to its documentation.
w
Warning:
Be sure to turn off the camera and flash before
connecting them.
Note:
When using the external flash, the internal flash setting is
disabled and the button does not work.
Follow the steps below to specify an internal or external
flash.
1. Make sure that the camera is in the Manual camera
mode. To change the camera mode setting, see
“Making camera mode settings” on page 4-5.
Note:
The external flash works only works in the Manual
camera mode. To change the camera mode setting, see
“Making camera mode settings” on page 4-5.
Slide the flash into the hot shoe
and make sure that the
connection is secure.
