A SERVICE OF

logo

Open as PDF
next previous
The test Command
The test Command
Command
Description
The
test
command lets you run diagnostic tests on the
components listed in Table 9–6:
Table 9–6 Diagnostic Tests
Test Name Device Tested
ASIC Application-specific integrated circuit
MEM Memory
NVR Non-volatile RAM and time-of-year (TOY) clock
SCC Serial communications controller
NI Network interface (Ethernet)
SCSI SCSI device(s)
ISDN
1
79C30A AMD chip
TCn TURBOchannel options, where n is the number of
the TURBOchannel device you wish to test
1
Running ISDN diagnostic tests also tests the audio port
Command
Syntax
Issue the
test
command as follows:
>>> test
component
Return
where component is any of the components listed previously. If
you issue the
test
command without specifying a component, the
system will test all components. For more information about the
test
command, see Chapter 14.
9–18 Using Console Commands