Interpreting the show Command Displays
The show error
Command
The
show error
command displays specific information about any
error that is occurring within your system.
Table 13–12 lists the devices that the
show error
command
provides information about:
Table 13–12 System Device Errors
Test Name Device Tested
ASIC Application-specific integrated circuit
MEM Memory
NVR Non-volatile RAM and time-of-year (TOY) clock
SCC Serial communications controller
NI Network interface (Ethernet)
SCSI SCSI device(s)
ISDN
1
79C30A AMD chip
1
Running ISDN diagnostic tests also tests the audio port
Error information about TURBOchannel devices will not be
displayed with the
show error
command. Refer to the DEC
3000 Models 600/600S AXP and 800/800S AXP Service
Informationand the DEC 3000 Models 700 AXP and 900 AXP
Service/Update Information Addendum for error information on
TURBOchannel devices.
The show error
Display
Figure 13–6 shows an example of a
show error
command
indicating a device that is failing.
Figure 13–6 The show error Display
>>>show error
Return
? 003 SCC 0x0050
? T-ERR-SCC-LK401 - 0 char rcvd
T-STS-SCC-LK401 - char = 700
Identifying a Problem 13–17
