A SERVICE OF

logo

Open as PDF
next previous
Moving the Secure System Jumper
Step 5: Move
Secure System
Jumper
Figure 11–4 indicates the position of the secure system jumper
on the system I/O board.
The secure system jumper is labeled on the I/O board, and the
Off and On positions indicated. Figure 11–4 shows the jumper in
the default Off position.
To make your system secure, remove the jumper from the Off
position and replace it in the On position.
Figure 11–4 Moving the Secure System Jumper
MLO-009376
Secure System
Off
On
Using the Password Security Feature 11–9