Supported Cables
Supported Cables
Cable
Descriptions
Table D–5 lists the cables supported by the 54-21813 module.
Table D–5 Cables Supported by the 54-21813 Module
Interface Cable Type Name Molding Pins
V.24 Extension BC22F-10 Straight 25-25
V.24 Extension BC22F-25 Straight 25-25
Equipment Between the Approved Module and a Digital
Circuit (PTT)
Equipment
Requirements
If any other equipment, including cables or wiring, is to be
connected between the 54-21813 module and the point of
connection to any particular digital circuit, that equipment must
conform as follows:
• The overall transmission characteristics of all other
equipment must not have any material effect on the
electrical conditions between the equipment and the digital
circuit.
• All other equipment must comprise only the following:
Approved equipment, which may be subject to limitations
on its use, for the purpose of connection between it and a
particular digital circuit.
Cable or wiring that complies with a code of practice for
the installation of equipment covered by this standard or
other requirements that may be applicable.
Special Information for PTT Network Users D–7
