A SERVICE OF

logo

Open as PDF
next previous
3.6 Selecting a Paper/Size Setting
3
3-19
Basic Copy Operations Chapter 3
To select the paper drawer
1 Touch [Paper/Size].
A screen appears, showing the available paper drawers.
2 Touch the key for the
desired paper drawer.
To specify the size of the paper in the 1st drawer
Since the size of standard-sized paper loaded into the 1st drawer is automatically
detected, it is usually not necessary to set the paper size.
However, it may be necessary to set the paper size if non-standard-sized paper is
loaded or if the paper size is not automatically detected for some reason.
✎
Reference
For details on loading the paper into the 1st drawer, refer to “Loading Paper Into
the 1st Drawer” on page 2-26.
1 Touch [Paper/Size].
A screen appears, showing the available Paper/Size settings.
2 Touch the key for the
1st drawer.
3 Touch [Change Size].
The Size Input screen
appears.