Kyocera KM-C2230 Manual

A SERVICE OF

next previous

7

7.8 Inserting Paper Between Transparencies (“OHP Interleave” Function)

7-22

Application Functions Chapter 7

7.8 Inserting Paper Between Transparencies (“OHP

Interleave” Function)

After each overhead transparency is copied, a page from a different paper source

can be added to the stack of transparencies as an overleaf. In order to use this

function, the overhead transparencies should be loaded into the 1st drawer.

To use the “OHP Interleave” function

1 Load interleaf paper with the same size and orientation as the overhead

transparencies into any paper drawer other than the 1st drawer.

2 Position the document(s) to be copied.

✎

Reference

For details, refer to “Feeding the Document” on page 2-41.

3 Touch [Application].

The Application screen appears.

4 Touch [OHP

Interleave].