A SERVICE OF

logo

10.10 Specifying Expert User Mode Functions
10
10-69
Utility Mode Operations Chapter 10
10.10 Specifying Expert User Mode Functions
Setting the Thick Paper and OHP Film Image Density Function
This function is used to adjust the density of the image printed on thick paper and
overhead projector transparencies. (The default settings are the standard settings
(middle settings).)
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
Touch [Enter].
4 Touch [Expert User Mode].
5 Touch [Thick Paper
and OHP Film Image
Density].
6 Touch and
to adjust the
image density.
7 Touch [Enter].
8 Touch [Exit] in the next
three screens that
appear.
The Basic screen
appears again.