2.3 Turning the Machine On and Off
2
2-19
Before Making Copies Chapter 2
Recovering From Power Save Mode
1 Press the [Start] key. (The Power Save mode can also be canceled by pressing
any key on the operation panel or by touching the touch panel.)
2 The touch panel comes on again, and then after the machine has finished
warming up, it is ready to begin printing.
Sleep Mode
If no operation is performed for the specified length of time, it automatically enters
Sleep mode.
As the factory default, the machine enters Sleep mode after 30 minutes.
The length of time after the last operation until the machine enters Sleep mode can
be specified using the “Sleep” function on the User’s Choice: 1 screen. For details,
refer to “Setting the “Sleep” Function” on page 10-13.
Recovering From Sleep Mode
1 Press the [Start] key. (The Sleep mode can also be canceled by pressing any
key on the operation panel or by touching the touch panel.)
2 The touch panel comes on again, and then after the machine has finished
warming up, it is ready to begin printing (after about 99 seconds at normal room
temperature (73.4 °F)).
