Kyocera KM-C2230 Manual

A SERVICE OF

next previous

3

3.6 Selecting a Paper/Size Setting

3-26

Basic Copy Operations Chapter 3

3 Select the desired paper size.

✎

Hint

Screens containing other paper sizes can be displayed by touching [Custom

Size] or [Other Sizes].

4 Touch [Paper Type].

5 Select the desired paper type.

6 Touch [Enter].

The message “Job has been stopped. To resume job press the Start Key.”

appears.

7 Press the [Start] key.

Scanning of the document continues.

8 Load paper of the specified size and type into the bypass tray.

The copies are printed.

✎

Hint

If scanning of the document is finished before paper is loaded into the bypass

tray, the status “Print Error” appears in the job display. However, after the paper

is loaded into the bypass tray, the status changes to “Printing” and printing

begins.

✎

Reference

For details on loading the paper, refer to “Loading Paper Into the Bypass Tray”

on page 2-35.