12
12.1 When the Print Quality Is Low
12-4
Troubleshooting Chapter 12
The edge of the printed output is
dirty.
Either the document pad or the
document transfer belt is dirty.
Clean the document pad or the
document transfer belt with a
soft cloth dampened with a
mild detergent. (See
page 9-3.)
The selected paper size is
larger than the document (with
a Zoom setting of “×1.000”).
Select a paper size that is the
same size as the document.
(See page 3-18.)
Otherwise, select the “Auto
Zoom” setting to enlarge the
copy to the selected paper
size. (See page 3-13.)
The orientation of the
document is different from the
orientation of the paper (with a
Zoom setting of “×1.000”).
Select a paper size that is the
same size as the document.
Otherwise, select a paper
orientation that is the same as
that of the document.
The copy was reduced to a
size smaller than the paper (a
reduced zoom ratio was
selected).
Select a zoom ratio that
adjusts the document size to
the selected paper size. (See
page 3-13.)
Otherwise, select the “Auto
Zoom” setting to reduce the
copy to the selected paper
size. (See page 3-13.)
Symptom Possible Cause Remedy
