10
10.10 Specifying Expert User Mode Functions
10-80
Utility Mode Operations Chapter 10
Setting the “PRT Area (Top Margin)” Function
This function is used to adjust the printing position at the left edge of the paper (in
comparison to the paper feed direction).
The top margin of the print area can be adjusted for each paper type.
The procedure described below is for 11 × 17-size paper.
✎
Condition
The top margin of the print area is adjusted during manufacturing of the
machine. Normally, the top margin will not need to be adjusted.
1 Load 11 × 17-size paper into the 1st drawer.
2 Turn the media type selection
dial to the setting for the type of
paper loaded.
3 Press the [Utility] key.
4 Touch [Admin. Mode].
5 Using the keypad, type in the
administrator access code.
❍ Touch [Enter].
6 Touch [Expert User Mode].
7 Touch [PRT Area (Top
Margin)].
