Filter
Top Products
6-2 85054B
Replaceable Parts
Introduction
Introduction
Table 6-1 lists the replacement part numbers for items included in the 85054B calibration
kit and Figure 6-1 illustrates each of these items.
Table 6-2 lists the replacement part numbers for items recommended or required for
successful operation but not included in the calibration kit.
To order a listed part, note the description, the part number, and the quantity desired.
Refer to “Contacting Agilent” on page 5-3.
Table 6-1 Replaceable Parts for the 85054B Calibration Kit
Item No. Description Qty Per
Kit
Agilent Part Number
Calibration Devices (50Ω Type-N)
1 Type-N (m) sliding load 1 85054-60035
2 Type-N (f) sliding load 1 85054-60036
3 Type-N (m) lowband load 1 00909-60011
4 Type-N (f) lowband load 1 00909-60012
5 Type-N (m) offset short 1 85054-60025
6 Type-N (f) offset short 1 85054-60026
7 Type-N (m) offset open 1 85054-60027
8 Type-N (f) offset open 1 85054-60028
Adapters
9 Type-N (m) to Type-N (m) 1 85054-60038
10 Type-N (f) to Type-N (f) 1 85054-60037
11 Type-N (f) to 7 mm 2 85054-60031
12 Type-N (m) to 7 mm 2 85054-60032
Wrenches
13
3/4 in., 135 N-cm (12 in-lb) Torque
1 8710-1766
14 Spanner 1 08513-20014
Calibration Kit Storage Case
15 Storage Case Assembly (includes items listed below) 1 85054-60039
16 Box 1 5180-7900
17 ID label 1 85054-80012
18 Foam pad (bottom) 1 85054-80023
19 Foam pad (lid) 1 5181-5543