Agilent Technologies 85054-90049 Work Light User Manual


 
85054B 1-5
General Information
Serial Numbers
Serial Numbers
A serial number is attached to this calibration kit. The first four digits followed by a letter
comprise the serial number prefix; the last five digits are the suffix, unique to each
calibration kit.
Recording the Device Serial Numbers
In addition to the kit serial number, the devices in the kit are individually serialized (serial
numbers are labeled onto the body of each device). Record these serial numbers in
Table 1-1. Recording the serial numbers will prevent confusing the devices in this kit with
similar devices from other kits.
Table 1-1 Serial Number Record for the 85054B
Device Serial Number
Calibration kit
Lowband load (m)
Lowband load (f)
Open (m)
Open (f)
Short (m)
Short (f)
Sliding load (f)
Sliding load (m)
Connector gage (f)
Gages
Gage Master (f)
Connector gage (m)
Gage Master (m)
Adapters
Type-N (m) to Type-N (m)
Type-N (f) to Type-N (f)
Type-N (f) to 7 mm
Type-N (m) to 7 mm
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________