Filter
Top Products
85054B A-9
Standard Definitions
Standard Class Assignments
IMPORTANT The following calibrations are only supported by certain PNA analyzers. See
your PNA series network analyzer embedded help system.
Notes:
1. If you are performing a TRL calibration:
•S
21
T and S
12
T must be defined as thru standards.
•S
11
A and S
22
A must be defined as reflection standards.
•S
11
B, S
11
C, S
22
B, and S
22
C must be defined as line standards.
2. If you are performing a TRM calibration:
•S
21
T and S
12
T must be defined as thru standards.
•S
11
A and S
22
A must be defined as reflection standards.
•S
11
B, S
11
C, S
22
B, and S
22
C must be defined as match standards.
3. If you are performing an LRM calibration:
•S
21
T and S
12
T must be defined as line standards.
•S
11
A and S
22
A must be defined as reflection standards.
•S
11
B, S
11
C, S
22
B, and S
22
C must be defined as match standards.
Table A-6 Blank Form for the PNA Series Network Analyzers
Calibration Kit Label:
________________________
Class
A
a
S
11
A
S
11
B
S
11
C
S
21
T
S
22
A
S
22
B
S
22
C
S
12
T
a.
For additional ports, make sure
values match the correct sex of
the port.