Filter
Top Products
2-6 Quick Start Guide
Exploring the User Interface ESG Family Signal Generators
Front Panel
30. Recall This hardkey lets you restore any instrument state that you
previously saved in a memory register. You can save up to 100
different instrument states in a combination of 100 memory
registers and 10 register sequences. The number of states you can
save, however, is limited by the size of whatever else is stored in the
file system.
31. DATA Input The TTL/CMOS-compatible DATA connector accepts an externally
supplied data input for digital modulation applications. This female
BNC connector is provided only on instruments with Option UN8.
32. DATA CLOCK
Input
The TTL/CMOS-compatible DATA CLOCK connector accepts an
externally supplied data-clock input for digital modulation
applications. This female BNC connector is provided only on
instruments with Option UN8.
33. SYMBOL SYNC
Input
The CMOS-compatible SYMBOL SYNC connector accepts the
digital-modulation symbol synchronization signal from an external
source. This female BNC connector is provided only on instruments
with Option UN8.
34. PULSE IN This connector accepts an externally supplied TTL-compatible pulse
signal. The pulse signal is activated with the Fast Pulse Off On
softkey or via SCPI command. The maximum input for this
connector is ±15 volts. This female BNC connector is provided only
on instruments with Option 1E6.
qsg.book Page 6 Friday, September 22, 2000 3:13 PM