Filter
Top Products
Quick Start Guide 2-15
ESG Family Signal Generators Exploring the User Interface
Rear Panel
26. BER DATA IN Use this connector to input the data streams for the bit-error-rate
measurements. This female BNC connector is present only on
instruments with Option UN7.
27. BER CLK IN Use this connector to input the clock signal for the bit-error-rate
measurements. This female BNC connector is present only on
instruments with Option UN7.
28. BER GATE IN Use this connector to input the clock gate signal for the
bit-error-rate measurements. The connector can be enabled or
disabled by a softkey or an GPIB command. This female BNC
connector is present only on instruments with Option UN7.
29. 321.4 MHz IN Use this connector to input a downconverted 321.4 MHz GSM signal
for base transceiver station (BTS) loopback measurements. This
female SMB connector is present only on instruments with
Option 300.
qsg.book Page 15 Friday, September 22, 2000 3:13 PM