Filter
Top Products
19
Accessory
Part number
Comes complete
with
Remarks
Switch
type
Toolholding
fixture
Collet chuck (mm)
Weight without
cabel (kg)
Nominal current (A)
Nominal power
Output (W)
Nominal power
consumption (W)
No load speed
(rpm)
Admissible
grinding point-
l
(mm)
Frequency (Hz)
Voltage (V)
Order number
STRAIGHT GRINDERS.
The optimised straight grinders in
all power classes for the widest pos-
sible variety of applications
The ideal structural shape for ergo-
nomic work
Constant speed, even at extremely
high loads
Efficient work with longest possible
service life
Robust motors with long service
lives and low maintenance costs
Extremely favourable weight-perfor-
mance ratio
2 608 570 019
1 907 950 503
1 907 950 505
3 602 025 002
0 602 225 101 265 200 8
0 602 225 104 135 200 8
0 602 225 107 72 200 8
0 602 225 204 200 300 8
0 602 225 211 72 300 8
0 602 233 201 265 200 8
0 602 233 204 135 200 8
0 602 233 207 72 200 8
0 602 233 304 200 300 8
0 602 226 201 265 200 25
0 602 226 204 135 200 25
0 602 226 207 72 200 25
0 602 227 204 200 300 25
0 602 227 211 72 300 25
0 602 228 201 265 200 50
0 602 228 204 135 200 50
0 602 228 207 72 200 50
0 602 228 204 200 300 50
0 602 228 211 72 300 50
0 602 229 101 265 200 50
0 602 229 104 135 200 50
0 602 229 104 200 300 50
50 000 80 40 0.2 0.7 3
50 000 80 40 0.5 0.7 3
50 000 80 40 0.9 0.7 3
50 000 125 65 0.5 0.7 3
50 000 125 65 1.4 0.7 3
Collet chuck 3 mm
Open-ended spanner SW 9
Open-ended spanner SW 11
Auxiliary handle
Bar handle,
offset output drive
Slide switch
HGS 44/8
2 608 570 019
1 907 950 503
1 907 950 505
3 602 025 002
50 000 260 150 0.9 1.7 3
50 000 260 150 1.7 1.7 3
50 000 260 150 3.2 1.7 3
50 000 400 230 1.7 1.7 3
Collet chuck 3 mm
Open-ended spanner SW 9
Open-ended spanner SW 11
Auxiliary handle
Bar handle,
offset output drive
Slide switch
2 608 570 079
2 607 950 511
30 500 260 150 0.9 1.6 6
30 500 260 150 1.7 1.6 6
30 500 260 150 3.2 1.6 6
29 000 400 230 1.7 1.6 6
29 000 400 230 4.6 1.6 6
Collet chuck 6 mm
2 open-ended spanner
SW 17
Bar handle,
offset output drive
Slide switch
2 608 570 079
2 607 950 511
12 000 260 150 0.9 1.6 6
12 000 260 150 1.7 1.6 6
12 000 260 150 3.2 1.6 6
18 000 400 230 1.7 1.6 6
18 000 400 230 4.6 1.6 6
Collet chuck 6 mm
open-ended spanner SW 17
Bar handle,
central output drive
Slide switch
2 608 570 079
2 607 950 511
12 000 260 150 0.9 1.3 6
12 000 260 150 1.7 1.3 6
18 000 400 230 1.7 1.3 6
Collet chuck 6 mm
with nut
open-ended spanner SW 17
Bar handle,
central output drive,
short spindle
for tight spaces
Slide switch
for grinding points
8 to 50 mm in diameter
Your specialist dealer can provide you with information on the complete set of quality accessories.The machines come equipped with a special 4-m-long cable without plug.
HGS 55/8
HGS 55/25
HGS 55/50
HGS 55/50
18