Filter
Top Products
5150
Comes complete
with
Accessory part
number
Toolholder Drive
Hex. = hexagon
Sq. = external square
Weight without
cabel (kg)
Nominal current (A)
Nominal power
output (W)
Nominal capacity
Output (W)
No load speed
(rpm)
Torque (Nm) for hard
screwdriving application
as per ISO 5393
Max.
thread size
Frequency (Hz)
Voltage (V)
Order number
IMPACT WRENCHES.
0 602 442 001 265 200 M 10
0 602 442 004 135 200 M 10
0 602 442 007 72 200 M 10
0 602 443 004 200 300 M 10
30 1650 170 85 0.5 1.1 1/4
HH Hex.
30 1650 170 85 1.0 1.1 1/4
HH Hex.
30 1650 170 85 1.8 1.1 1/4
HH Hex.
30 1780 265 135 1.0 1.1 1/4
HH Hex.
Handle grip with
ON/OFF and
reverse switch
HSS 48
Remarks
impact wrenches for
screws from M6 to M 30
0 602 440 001 265 200 M 12
0 602 440 004 135 200 M 12
80 1410 260 140 0.9 2.4 1/2HH Sq. with spring pin
80 1410 260 140 1.7 2.4 1/2
HH Sq. with spring pin
Handle grip with
ON/OFF and
reverse switch
HSS 55
0 602 435 001 265 200 M 22
0 602 435 004 135 200 M 22
0 602 435 008 72 200 M 22
350 800 850 580 2.2 5.6 3/4HH Sq.
350 800 850 580 4.5 5.6 3/4
HH Sq.
350 800 850 580 8.5 5.6 3/4
HH Sq.
Palm grip with
ON/OFF and
reverse switch
Auxiliary handle 1 602 025 030
HSS 75
0 602 433 101 265 200 M 16
0 602 433 104 135 200 M 16
0 602 433 107 72 200 M 16
0 602 438 004 200 300 M 16
190 1100 360 220 1.0 3.0 1/2
HH Sq. without spring pin
190 1100 360 220 2.0 3.0 1/2
HH Sq. without spring pin
190 1100 360 220 3.7 3.0 1/2
HH Sq. without spring pin
190 1100 550 340 2.0 3.0 1/2
HH Sq. without spring pin
Centre grip with
ON/OFF and
reverse switch
HSS 64
0 602 439 001 265 200 M 30
0 602 439 004 135 200 M 30
0 602 439 007 72 200 M 30
1000 600 950 700 2.8 8.6 1HH Sq.
1000 600 950 700 5.5 8.6 1
HH Sq.
1000 600 950 700 10.0 8.6 1
HH Sq.
Two handled grip
with ON/OFF and
reverse switch
HSS 77
The machines come equipped with a special 4-m-long cable without plug. Your specialist dealer can provide you with information on the complete set of quality accessories.