Filter
Top Products
32 33
Accessory
Part number
Comes complete
with
Remarks
Switch
type
Toolholding
fixture
chuck (mm)
Weight without
cabel (kg)
Nominal current (A)
Nominal power
Output (W)
Nominal power
consumption (W)
No load speed
(rpm)
Admissible grinding
wheels-
l (mm)
Frequency (Hz)
Voltage (V)
Order number
ANGLE GRINDERS
1 605 510 173
2 605 703 014
1 603 345 043
1 607 950 061
2 607 950 511
1 602 025 022
0 602 334 101 265 200 230
0 602 334 107 72 200 230
0 602 334 134 200 300 230
0 602 334 136 200 300 230
6600 2500 2000 6.7 8.5
6600 2500 2000 24.7 8.5
6600 3800 3100 13.2 8.5
6600 3800 3100 13.2 8.5
Protective guard
l 230 mm
Mounting flange
Round nut
Pin-type wrench
Open-ended spanner SW 17
Auxiliary handle
For heavy grinding work.
SDS-click available as
special accessory.
Lever with lock
Lever with lock
Toggle
Mounting flanges M 14
for grinding wheels
with bore-
l
22,3 mm
HWS 810/230
for grinding wheels
230 to 300 mm in diameter
1 605 510 212
2 605 703 011
1 603 345 043
2 605 703 022
1 907 950 007
1 607 950 061
2 607 950 511
1 602 025 022
0 602 335 001 265 200 300
0 602 335 004 135 200 300
0 602 335 007 72 200 300
0 602 335 034 200 300 300
0 602 335 036 200 300 300
4700 2500 2000 6.7 10.0
4700 2500 2000 13.2 10.0
4700 2500 2000 24.7 10.0
5100 3800 3100 13.2 10.0
5100 3800 3100 13.2 10.0
Protective guard
l 300 mm
Mounting flange
Round nut
Mounting flange
Internal hexagon key
Pin-type wrench
Open-ended spanner SW 17
Auxiliary handle
For cutting work.
Lever with lock
Lever with lock
Toggle
Mounting flanges M 14
for grinding wheels
with bore-
l
22,3 mm
HWS 810/300
The machines come equipped with a special 4-m-long cable without plug. Your specialist dealer can provide you with information on the complete set of quality accessories.
The correct grinder/sander for
every application
Extremely robust and maintenance-
friendly motors
Constant speeds throughout the
whole power range for top economy
and longest possible service lives
Robust angular gear with high
operational performance