Filter
Top Products
2120
Order number
Voltage (V)
Frequency (Hz)
Admissible
grinding point-
l
(mm)
No load speed
(rpm)
Nominal power
consumption (W)
Nominal power
Output (W)
Nominal current (A)
Weight without
cabel (kg)
Toolholding
fixture
Collet chuck (mm)
Switch
type
Remarks
Comes complete
with
Accessory
Part number
STRAIGHT GRINDERS.
The optimised straight grinders in
all power classes for the widest pos-
sible variety of applications
The ideal structural shape for ergo-
nomic work
Constant speed, even at extremely
high loads
Efficient work with longest possible
service life
Robust motors with long service
lives and low maintenance costs
Extremely favourable weight-perfor-
mance ratio
1 608 570 025
1 607 950 001
0 602 228 361 265 200 50
0 602 228 364 135 200 50
0 602 228 364 200 300 50
0 602 228 371 265 200 50
0 602 228 374 135 200 50
0 602 228 377 72 200 50
0 602 228 374 200 300 40
0 602 238 101 265 200 50
0 602 238 104 135 200 50
0 602 238 107 72 200 50
0 602 238 134 200 300 50
0 602 238 111 72 300 50
0 602 207 001 265 200 32
0 602 207 004 135 200 32
0 602 207 008 72 200 32
0 602 208 001 135 200 50
0 602 208 001 200 300 27
0 602 209 101 265 200 50
0 602 209 104 135 200 50
0 602 209 107 72 200 50
0 602 209 134 200 300 50
0 602 209 111 72 300 50
12 000 260 150 0.9 1.6 6
12 000 260 150 1.7 1.6 6
18 000 400 230 1.7 1.6 6
Collet chuck
l 6 mm
Offset screwdriver
Bar handle,
central output drive
with eccentric
clamping
ON/OFF switch
HGS 55/50
1 608 570 025
1 607 950 001
12 000 260 150 0.9 1.6 6
12 000 260 150 1.7 1.6 6
12 000 260 150 3.2 1.6 6
18 000 400 230 1.7 1.6 6
Collet chuck
l 6 mm
Offset screwdriver
Pistol handle,
with eccentric
clamping
Pressure switch
with lock
1 608 570 025
1 907 950 506
1 907 950 509
12 000 400 270 1.6 2.1 6
12 000 400 270 3.3 2.1 6
12 000 400 270 6.1 2.1 6
18 000 600 400 3.3 2.1 6
18 000 600 400 9.2 2.1 6
Collet chuck
l 6 mm
Open-ended spanner SW 12
Open-ended spanner SW 15
Post handle,
central output drive
Spindle length up to
480 mm optional.
Pressure switch
with lock
1 608 570 025
1 907 950 506
1 907 950 509
23 400 600 440 1.6 2.4 6
23 400 600 440 3.3 2.4 6
23 400 600 440 5.9 2.4 6
18 300 600 440 3.3 2.4 6
27 400 900 630 3.3 2.4 6
Collet chuck
l 6 mm
Open-ended spanner SW 12
Open-ended spanner SW 15
Post handle,
central output drive
Toggle
1 608 570 025
1 907 950 506
1 907 950 509
12 000 600 440 1.6 2.5 6
12 000 600 440 3.3 2.5 6
12 000 600 440 5.9 2.5 6
18 000 900 630 3.3 2.5 6
18 000 900 630 8.8 2.5 6
Collet chuck
l 6 mm
Open-ended spanner SW 12
Open-ended spanner SW 15
Post handle,
central output drive
Toggle
for grinding points
27 to 50 mm in diameter
The machines come equipped with a special 4-m-long cable without plug.
HGS 55/50
HGS 57/50 Ls
HGS 65/32
HGS 65/50
Your specialist dealer can provide you with information on the complete set of quality accessories.