Filter
Top Products
35
Accessory
Part number
Comes complete
with
Remarks
Switch
type
Toolholding
fixture
Collet chuck (mm)
Weight without
cabel (kg)
Nominal current (A)
Nominal power
Output (W)
Nominal power
consumption (W)
No load speed
(rpm)
Admissible grinding
wheels-
l (mm)
Frequency (Hz)
Order number
Voltage (V)
DISC SANDERS AND RANDOM ORBIT SANDERS.
disc sanders and random orbit
sanders for sanding discs with
180 mm diameter
2 607 950 511
1 602 025 022
2 912 521 237
2 916 680 011
2 601 329 036
0 602 373 004 135 200 180
0 602 373 004 200 300 180
3600 850 580 2.2 3.7
5400 1300 900 4.5 3.7
For fibre-sanding discsToggleThreaded mounting
M 14
HTS 75/180
Open-ended spanner SW 17
Auxiliary handle
Ringscrew
Spring
Gloves
1 907 950 513
1 907 950 511
1 602 025 022
2 601 329 036
0 602 370 101 265 200 180
0 602 370 104 135 200 180
0 602 370 107 72 200 180
6000 1000 800 3.4 4.7
6000 1000 800 6.0 4.7
6000 1000 800 12.8 4.7
For fibre-sanding discsToggleThreaded mounting
M 14
HTS 86/180
Open-ended spanner SW 24
Open-ended spanner SW 19
Auxiliary handle
Gloves
2 602 025 067
2 605 411 046
2 605 702 009
1 907 950 007
0 602 370 301 265 200 150
0 602 370 304 135 200 150
0 602 370 307 72 200 150
0 602 370 311 72 300 150
0 602 370 334 200 300 150
5800 520 360 1.6 2.7
5800 520 360 3.2 2.7
5800 520 360 6.1 2.7
7300 800 550 6.1 2.7
7300 800 550 3.2 2.7
Slide switchFastener
HEX 5265/150
Auxiliary Handle
Dust bag
Screw-on connector
Allen key
The machines come equipped with a special 4-m-long cable without plug. Your specialist dealer can provide you with information on the complete set of quality accessories.
34
The correct sander for all surfaces
Best sanding results, even on large
surfaces
Robust motors with an extremely
long service life
Small random orbit sander with
very high performance