Filter
Top Products
For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
Page 12SKU 95424, 95629
ASSEMBLY INSTRUCTIONS (CONTINUED)
Stationary
Mobile
Set the Axle (36A) with the Back Wheels
(37A) attached against the bottom of the
case. Then, screw the Bolts through the
Washers and into the bottom of the case.
(See Figure 4, above left.)
Set Arm (5A) against the top back of the
welder case. Screw the Bolts through
Washers and into the welder case.
(See Figure 4, above right.)
Set the Support (35A) against the bot-
tom back of the case. Align the holes and
screw the Bolts through the Washers and
into the case.
Set the Axle (36A) with the Back Wheels
(37A) against the bottom of the Support
(35A). Screw the Bolts through the Wash-
ers and into the Support.
Install the Back Wheels (37A) at the Axle (36A). Install the Back Wheels (37A) at the Axle (36A).
2. 2.
3.
Fix the Back Wheels(37A) with the
Clips (38A).
3.
Fix the Back Wheels (37A) with the
Clips (38A).
4.
4.
Arm (5A)
Washer and Bolt