Filter
Top Products
For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
Page 23SKU 95424, 95629
MIG&ARC 250 AMP - SKU 95424
MIG DUAL 250 AMP – SKU
For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
Page 25
WELD SETTINGS CHART
This Chart is intended to show
general
guidelines for different wire sizes and for dif-
ferent thicknesses of material. The settings should only be used at the beginning of a weld
and must be adjusted after stopping and carefully inspecting the weld. Proper welding
takes good technique and practice.
FIGURE J
MIG WELD SETTINGS CHART
FIGURE J
This Chart is intended to show general guidelines for different wire sizes and for
different thickness of material. The settings should only be used at the beginning of a weld
and must be adjusted after stopping and carefully inspecting the weld. Proper welding takes
good technique and practice.